E3 Dual-Channel 4K HDMI & 3G-SDI HEVC Video Encoder

Flexible, Powerful, Professional: a new generation of video encoder

The Kiloview E3 is a new generation of video encoder which builds on the capabilities of the E1 and E2 models with new features, including:

• Video input and loop through with HDMI (up to 4K P30) and 3G-SDI (up to 1080 P60)
• Encodes both HDMI and 3G-SDI video by H.265 and H.264 simultaneously or alternatively a wide range of protocols including NDI|HX2 / NDI|HX3* / SRT / RTMP / RTSP / UDP/ HLS for either live production, post production, remote transmission, live streaming or recording. Simultaneous encoding resolution up to 1080p60 for both 3G-SDI and HDMI. If the HDMI resolution is 4Kp30, the video will be either down-scaled to 1080P60 for simultaneous encoding, or you can select either 3G-SDI or HDMI or a mix video with PIP or PBP layout.
• With the up-to-date chipset and HEVC technology, the E3 supports streaming to 16 destinations with an adjustable bitrate up to 100Mbps simultaneously (8 destinations for the main-stream, 8 destinations for the sub-stream). 

*The NDI|HX3 feature is under development and will be confirmed when it has been certified by NDI.

P Series 4G-LTE Bonding Video Encoder

The Kiloview P series 4G bonding encoder is a reliable, stable and cost effective solution for outdoor live streaming.

Kiloview P series video encoder is a professional high-end encoding device specifically designed for mobile applications. It adopts KiloLink –  Kiloview’s patented algorithm to solve the problem of poor connectivity. It is ideal for outdoor live streaming and transmission scenarios such as live events, concerts, sports and remote broadcasts.

Kiloview P series features ultra-low end-to-end latency (<1s) and supports voice intercom with Kiloview KIS, it’s also perfect for remote program production or group interaction.

There are two models in the P Series: P1 supports SDI input, P2 supports HDMI input.

U40 4K NDI® Encoder

The U40 transforms any camera into an NDI camera

The Kiloview U40 easily converts HDMI/USB/IP streams to NDI® and is up to 4KP60 compatible.  With only one network cable, video sources from HDMI, PTZ, USB cameras and others can easily go into the NDI® world and enjoy the advantages of IP-based transmission featuring ultra-high image quality and ultra-low latency.

With Comprehensive NDI® performance, Kiloview U40 converts HDMI to NDI® with up to 4Kp60 resolution. In addition, it is compatible with NDI®|HX. U40 also converts IP streams such as SRT/RTMP/RTSP/UDP/HLS to NDI®|HX (available shortly by software upgrade).

The U40 encoder has an exquisite compact round design with a robust metal casing, integrating a wide range of functions including network switching, NDI® encoding, heat dissipation, POE and DC Out.

Additional key features 

• Flexible mounting options, with two methods for hot shoe fixing - it can either be installed on the camera upright or horizontally.
• Dual Gigabit Ethernet ports which can be applied to two different networks simultaneously. 
• Supports PTZ control, receiving the PTZ signal sent by the NDI® production system or NDI® decoder, and then controlling the PTZ camera through the serial port (232/485, etc) or network.
• The U40 is encased in aluminum alloy for better heat dissipation and thermal conductivity compared to plastic or other materials and designed with heat dissipation holes on the top.

N2 WIRELESS HDMI TO NDI VIDEO ENCODER

HDMI to NDI|HX Wireless Encoder

• HDMI input
• Compatible with other NDI hardware and software products
• SRT supported
• Wireless transmission & 4G-LTE supported
• Full range protocols including NDI-HX/SRT/RTSP/RTMP/RTMPS/HLS/TS over UDP 
• Built-in battery powered
• Tally light for program and preview
• User-defined image and text overlay
• Dual-stream output for main stream and sub stream simultaneous to 8 live platforms
• Local recording and NAS storage
• Adjustable bitrate from 64Kbps~40Mbps

The Kiloview N2 HDMI to NDI video encoder is a professional video encoding device for NDI video production. It can encode an HDMI video source into NDI protocol streams, and transmit video over wired or WIFI networks for any NDI compatible systems, devices or software. 

- Ultra low-latency, mutual identification and communication of multiple data streams

- Smart connection, discovered and connected by other NDI devices automatically

Portable design, compact and stable NDI Wireless transmission

• Built-in 5.0GHz WIFI realises stable NDI Wireless transmission, or USB-extend Ethernet transmission
• 115 x 75 x 35mm, 380g, hot shoe mount makes it easy to install on a camera
• Built-in large-capacity lithium battery, supports 5-16v external mobile power supply, which can last about 5 hours
• Internal cooling fan delivers stable and reliable performance in high temperature conditions.
• Easy to operate, it supports wireless remote management using mobile phone/ipad terminal app

Powerful encoding function, dual stream output, customised graphic overlay, voice intercom, local recording

• Wide adjustable code rate (64kbit/s to 40Mbit/s)
• Dual stream output, the main code rate supports video encoding up to 1080p60Hz, and the sub-stream supports 720p 60Hz video encoding
• Text and image overlay function
• Voice intercom function (with additional software)
• With SD/TF card slot, it supports local recording, and supports NAS network storage

G1 HD SDI to IP 4G-LTE Wireless Video Encoder

Kiloview G1 wireless video encoder can convert full 1080p SDI signal to IP signal without loss.

This live Encoder can be used with streaming platforms through 4G-LTE, wifi or wired Ethernet with RTSP/RTMP/SRT/RTP. The web-based management page for the G1 video encoder is easy to use. The Kiloview G1 encoder is widely used in streaming live broadcasts, educational remote learning, hotel tv systems etc.

Key Features

• H.264 video encoding
• SRT
• Full HD Live streaming
• Support wifi/4g/Ethernet
• Dual streams output supported
• Low bandwith (1Mbps@720p, 1.5Mbps@1080p)
• Low latency( ≤ 67
• SDI Loop-through for live monitoring
• Low power consumption (<4w)
• Portable
• Manage with Android app or via web app

N1 WIRELESS SDI TO NDI VIDEO ENCODER

SDI to NDI|HX Wireless Encoder

• SDI input
• Compatible with other NDI hardware and software products
• SRT supported
• Wireless transmission & 4G-LTE supported
• Full range protocols including NDI-HX/SRT/RTSP/RTMP/RTMPS/HLS/TS over UDP 
• Built-in battery powered
• Tally light for program and preview
• User-defined image and text overlay
• Dual-stream output for main stream and sub stream simultaneous to 8 live platforms
• Local recording and NAS storage
• Adjustable bitrate from 64Kbps~40Mbps

The Kiloview N1 SDI to NDI video encoder is a professional video encoding device for NDI video production. It can encode SDI video sources into NDI protocol streams, and transmit video over wired or WIFI networks to any NDI compatible systems, devices or software. 

- Ultra low-latency, mutual identification and communication of multiple data streams

- Smart connection, discovered and connected by other NDI devices automatically

Portable design, compact and stable NDI Wireless transmission

• Built-in 5.0GHz WIFI realises stable NDI Wireless transmission, or USB-extend Ethernet transmission
• 115 x 75 x 35mm, 380g, hot shoe mount for easy installation on cameras
• Built-in large-capacity lithium battery, supports 5-16v external mobile power supply, which can last about 5hours
• Internal cooling fan delivers stable and reliable operation in high temperature conditions
• Easy to operate, it supports wireless remote management using mobile phone/ipad terminal app

Powerful encoding function, dual stream output, customised graphic overlay, voice intercom, local recording

• Wide adjustable code rate (64kbit/s to 40Mbit/s)
• Dual stream output, the main code rate supports video encoding up to 1080p60Hz, and the sub-stream supports 720p 60Hz video encoding
• Text and image overlay function
• Voice intercom function (with additional software)
• With SD/TF card slot, it supports local recording, and supports NAS network storage

M2 H.264 HDMI & VGA DUAL INPUT LIVE VIDEO ENCODER

HDMI and VGA Wired Encoder

M2 wired video encoder is an encoding device equipped with professional interface. It can encode VGA or HDMI signal and transmit to online platforms / live broadcast. Kiloview M2 encoder is widely used in healthcare, education, corporate comms and video conferencing.

• H.264 video encoding
• SRT supported
• HDMI+VGA dual input
• Low latency( ≤ 67)  
• Support RJ-45 Ethernet
• Low power consumption (<4w)
• Low bandwidth transmission
• Portable 182 x 122 x 36mm

Dual interface design, compatible with VGA or HDMI video sources.

• VGA interface compatible with VGA/XGA/UVGA/SVGA/SXGA/SXGA+/ WXGA/WXGA+/WSXGA/WUXGA and other video sources.
• HDMI interface compatible with HDMI1.4 and below.

Powerful streaming media service function, supports image and text overlay, voice intercom, video storage and other functions.

• RTP/ RTSP/ RTMP/ HLS/ TS/ Onvif/ SIP/ NDI (customization available) and  streaming media protocols supported for live broadcast on Facebook, YouTube, Ustream, Twitch, Wowza etc or security platform / NVR system.
• SRT supported
• Dual stream output, the main code rate up to 1080p60Hz, and the sub-stream supports 720p60Hz video encoding.
• Capable with customised text and image overlay function
• Audio embedding encoding supported, with voice intercom function (need to deploy voice intercom software).
• With SD/TF card slot, it supports local recording/ and NAS network storage.

G2 1080P HDMI to IP 4G-LTE

Wireless Video Encoder

The Kiloview G2 wireless video encoder can convert full 1080P HDMI video sources to IP signal without loss and stream to broadcast platforms through ethernet, built-in Wifi or 4g network, which makes live broadcasting accessible anytime, from anywhere. Kiloview G2 encoder is widely applied in hotel TV systems, education, video conferencing, corporate comms and broadcasting.

Key Features

• H.264 video encoding
• SRT supported
• HDMI loop through for live monitoring
• Voice intercom
• SDK provided
• Support wifi/4g/Ethernet
• Low power consumption (<4w)
• Text and image overlay

Built-in WIFI module, wireless video transmission/live broadcast supported.

• Built-in dual-band (2.4G/5.8G Hz) wifi module, USB 4G-LTE Dongle supported, it supports wireless transmission/ live broadcast of mobile video sources in local space.
• Built-in self-adaptive Ethernet interface, wired network transmission also supported.

• RTP/ RTSP/ RTMP/ HLS/ TS/ Onvif/ SIP/ NDI (customisation available) and some other streaming media protocols supported for live broadcast on Facebook, YouTube, Ustream, Twitch, Wowza etc or security platform / NVR system.
• Dual stream output, the main code rate up to 1080p60Hz, and the sub-stream supports 720p 60Hz video encoding.
• Text and image overlay function.
• With SD/TF card slot, it supports local recording, and supports NAS network storage.

S2 UHD 4K Video Encoder

The S2 UHD Video Encoder is designed to meet the needs of all 4K video transmission applications.

The S2 offers input resolutions up to 4Kp60 and encoding resolutions is up to 4Kp30. It supports H.265 (HEVC)/H.264 high-performance encoding and most protocols including NDI|HX/SRT/RTMP/RTMPS/HLS/UDP/RTSP/Onvif.

With H.265 HEVC encoding, S2 offers a lower encoding bitrate and with a reduction of more than 50% bandwidth comparing with H.264. 

The HDMI 2.0 input, S2 supports 4Kp60 HDMI and encodes up to 4Kp30, and is compatible with SD/HD/VESA.

S2 supports RTSP/RTMP/RTMPS/HLS/TS-UDP/Onvif1.1/2.0/ and NDI|HX, so users can live stream with RTMP/RTMPS, produce live content with NDI|HX and manage remote productions with SRT, at the same time with one device.

E2-NDI HDMI to NDI Encoder

WIRED HDMI to NDI|HX Encoder

• HDMI input and loop for monitoring
• SRT Supported
• Wired transmission
• Full range protocols including NDI-HX/SRT/RTSP/RTMP/RTMPS/HLS/TS over UDP 
• Tally light for program and preview
• User-defined image and text overlay
• Dual-stream output for main stream and sub stream simultaneous to 8 live platforms
• Local recording and NAS storage
• Adjustable bitrate from 64Kbps~40Mbps

NDI Output, NDI Virtual Input
Deliver any digital video source to the network in full HD, with high-efficiency NDI® output via NDI|HX and native support for resolutions up to 1080p. Designate E2 as the video input source in popular desktop video applications like Google Hangouts, GoToMeeting, Skype, Skype for Business, WebEx, Zoom, and more using the free NDI® Virtual Input tool.

SRT supported to ensure secure and reliable transmission.

Web-Based Interface
Monitor video, manage login credentials, access recording controls and configure audio, video, and network settings from any supported Web browser on any compatible networked device.

Network Visibility
Access devices connected to other networks via IP address and make them visible within your production environment using NDI Access Manager.

Strong Flexibility To Support Secondary Development
Open API programming, SDK provided for second development; Customisation service is available based on client’s needs.

Support All Live Broadcast Platforms
Support RTMP/HLS/SRT/TS streaming media protocols for live broadcast. Dual streams output supported and can be pushed to different live broadcasting platforms simultaneously, main stream encoding up to 1080p60Hz, sub stream encoding support 540p 60Hz.

Supports ONVIF 1.1/2.0: Easy Access To Security Protection System / NVR System

E1-NDI SDI to NDI Encoder

Wired NDI|HX Video Encoder 

• SDI input and loop for monitoring
• SRT Supported
• Wired transmission
• Full range protocols including NDI-HX/SRT/RTSP/RTMP/RTMPS/HLS/TS over UDP 
• Tally light for program and preview
• User-defined image and text overlay
• Dual-stream output for main stream and sub stream simultaneous to 8 live platforms
• Local recording and NAS storage
• Adjustable bitrate from 64Kbps~40Mbps

NDI Output, NDI Virtual Input
Deliver any digital video source to the network in full HD, with high-efficiency NDI® output via NDI|HX and native support for resolutions up to 1080p. Designate E1 as the video input source in popular desktop video applications like Google Hangouts, GoToMeeting, Skype, Skype for Business, WebEx, Zoom, and more using the free NDI® Virtual Input tool.

Web-Based Interface
Monitor video, manage login credentials, access recording controls and configure audio, video and network settings from any supported Web browser on any compatible networked device.

Network Visibility
Access devices connected to other networks via IP address and make them visible within your production environment using NDI Access Manager.

Strong Flexibility To Support Secondary Development
Open API programming, SDK provided for second development; Customisation service is available based on client’s needs.

Supports All Live Broadcast Platforms
Supports RTMP/HLS/SRT/TS streaming media protocols for live broadcast. Dual streams output supported and can be pushed to different live broadcasting platforms simultaneously, main stream encoding up to 1080p60Hz, sub stream encoding support 540p 60Hz.

Supports ONVIF 1.1/2.0: Easy Access To Security Protection System / NVR System